500 Gallon Slurry Fertigation Mixing Tanks
- Voltage:
- 110-600v
- Material:
- SUS304, SUS316L
- Power:
- 2.2 kW
- Power(w):
- 0.75-75kw
- Heating:
- steam,electric,hot water
- Dimension(I*w*h):
- as per need
- Customization:
- Available
- After-sales Service:
- Online/Spare Parts/Life-Long Aftersale Service
- Warranty:
- 1 Year
- Condition:
- New
- Key Selling Points:
- Easy to Operate
An electric lift mixing tank with a built in vacuum pump extracts entrained air bubbles and eliminates micro-foaming during liquid dispersion, preventing oxidative fluid degradation while motorized lead screws raise the agitator head for swift impeller washdown between formulation runs.
Degassing Parameters And Sub-Atmospheric Operating Limits
| System Parameter | Engineering Setpoint | Fluid Processing Result |
|---|---|---|
| Vacuum Evacuation Level | -0.085 to -0.098 MPa | Eliminates trapped air pockets from viscous emulsions |
| Lead Screw Elevation Speed | 18 - 35 mm/s | Provides stable vertical travel without hydraulic fluid leaks |
| Vessel Absolute Pressure | 20 - 100 mbar | Lowers solvent boiling points for gentle moisture stripping |
| Impeller Tip Shear Velocity | 12 - 22 m/s | Breaks agglomerates while negative pressure vents vapor |
Sub-Atmospheric Deaeration In High-Solids Formulations
Introducing fine powders into a slurry mixing tank generates severe air entrapment that causes product separation and uneven coating density. Operating internal dispersal impellers under negative barometric pressure draws sub-micron bubbles out of dense suspensions, stabilizing specific gravity and accelerating complete particle wetting without foaming overflow.
Motorized Agitator Elevation And Drainage Hygiene
Standard top-entry mixers require overhead cranes or manual hoists during sanitary washdowns, extending idle maintenance periods. Electromechanical screw drives elevate the motor and shaft assembly vertically above the vessel rim, exposing lower mechanical seals for inspection. Deploying an automated 500 gallon mixing tank with motorized lifting capabilities simplifies vessel clearance while preventing lubrication drips from entering processing zones.
Soluble Nutrient Dissolution In Liquid Agitation Systems
Bulk agricultural preparations depend on consistent mineral solubility without precipitation clogging downstream spray nozzles. Running high-volume fertigation mixing tanks under continuous mechanical agitation breaks down dense crystalline salts, maintaining uniform chemical potency throughout field distribution lines.
FAQ: Vacuum Integrity And Mechanical Lift Controls
How does negative pressure improve emulsion shelf life?
Drawing negative pressure inside the vessel pulls dissolved oxygen away from liquid surfaces before packaging begins. Vacuum deaeration stops chemical oxidation, preserves emulsion color, and guarantees smooth surface finishes across cosmetic creams and food condiments.
Why do electric screw lifts outperform hydraulic lift cylinders in cleanroom applications?
Electric linear actuators eliminate pressurized hydraulic oil circuits, removing contamination hazards caused through seal blowouts or line weeping. Precision limit switches control stroke positioning, locking the agitator head securely at predetermined heights for maintenance access.
Key Selling Points
- Batch flexibility：Electric-Lift Frame Mixing Tank with Built-In Vacuum Pump suits multi-product, multi-batch production and allows cleaning and processing rhythm to be adjusted at changeover.
- Ease of operation：The integrated vacuum pump can be coordinated with mixing, emulsification, and heating so the process sequence follows the formulation.
- Maintenance：The area around the frame agitation can be arranged for cleaning, inspection, and local service, helping shorten preparation between batches.
- Maintenance：The seals and vacuum piping of the integrated vacuum pump should be included in routine inspection to maintain stable operation.
- Ease of operation：The use of the lifting frame makes equipment position, operating angle, or service access easier to adapt in multi-product and frequent-changeover production, so operators can follow the formulation and batch rhythm required by Electric-Lift Frame Mixing Tank with Built-In Vacuum Pump.
Agitator Type
 |
 |
 |
 |
||||
| High Shear Homogenizer/high shear mixer/homogenizer head | Sawtooth Impeller/high shear dispersion blade /Cowles Blade Impeller | 3-Blade Propeller Impeller/Three-Leaf Paddle/Marine Propeller | Gate/Frame / Anchor Impeller | ||||
 |
 |
 |
 |
||||
| Rushton Turbine/Flat-blade disk turbine | Helical Ribbon Impeller/helical ribbon mixer | Pitched Blade Impeller | Dual Pitch Impeller |
Recommended Process
The equipment can serve batch mixing, auxiliary homogenization, and material transfer and connect with adjacent batching, storage, or filling stages, so the final arrangement can match the production needs of Electric-Lift Frame Mixing Tank with Built-In Vacuum Pump.
Visible Configuration
The project material supports the lifting frame, integrated vacuum pump, vacuum processing system, frame agitation, and vessel system. Electric-Lift Frame Mixing Tank with Built-In Vacuum Pump can adapt its process units, cleaning method, and operating layout to the material.
